This policy explains how Jujin Plastic Technology (M) Sdn. Bhd. (Registration No. 202501027253 (1628665P)) (“Jujin”, “we”) collects, uses and protects personal data, in line with Malaysia’s Personal Data Protection Act 2010 (PDPA).
We only collect the personal data you choose to give us, such as when you send an enquiry or request a quotation:
Our web host keeps standard server logs (such as IP address, browser type and pages visited) for security and troubleshooting. This website does not use analytics or advertising cookies.
We do not sell or rent your personal data, and we do not send marketing messages unless you ask us to.
Only when needed for the purposes above, we may share your data with:
Drawings and technical files are shared only to quote or make your parts, and are treated as confidential.
If you contact us on WhatsApp, your messages are also handled by WhatsApp (Meta) under its own privacy policy.
We keep personal data only for as long as needed for the purposes above, or as required for tax, accounting and legal reasons. After that it is deleted or securely destroyed.
We take reasonable practical steps to protect your data from loss, misuse and unauthorised access. Access is limited to staff who need it for their work.
Under the PDPA you may ask to see the personal data we hold about you, ask us to correct it, or withdraw your consent and limit how we use it. Contact us using the details below and we will reply within 21 days.
If you do not give us the data we need, we may not be able to reply to your enquiry or prepare a quotation.
We may update this policy from time to time. The latest version is always on this page.
No. 9, Jalan Industri Impian 1, Taman Industri Impian, 14000 Bukit Mertajam, Penang, Malaysia · 019-537 8675 · edison@jujin-tech.com
JUJIN PLASTIC TECHNOLOGY (M) SDN. BHD. is principally engaged in the supply of hardware components, SMT supporting accessories, electronic and electrical products and industrial chemicals, alongside equipment agency services.
Two of those lines are quoted from your drawing — SMT tooling and fixtures, and automation fixtures, against a published tolerance table. Everything else we specify, source and consolidate.
See what we supply to a drawing →Laser & nano stencils, removable frames, pallets, feeders, magazines, test systems, conveyors.
Screw, vacuum, pressure-holding, insulation-test and multi-function fixtures — designed and supplied to your part.
End mills and precision inserts — chucks, collets, mandrels, locating plates and pull studs.
Adhesives, nano coating and high-temperature grease from Karibom, Themis, Aculon and Vaden.
Device displays, solenoid valves, relays, safety switches and PLCs.
Equipment accessories, testing instruments, labour supplies and auxiliary materials.
Monitored rivet guns, auto rivet-pulling machines, screw cells and non-standard automation.
This is the part of the business built to a drawing rather than bought in, against a published tolerance table and measuring room. Written as real numbers, not adjectives. Materials: Durostone, Ricocell, aluminium alloy, bakelite, copper. Treatments: stainless steel heat treatment, nickel plating, chromium plating, anodic oxidation.
Full capabilities page →Industrial lubricants, cleaning solutions and adhesives are a supply line in their own right — not an afterthought to the stencil order. We match the chemistry to the substrate pair, the cycle time and the wash system you already run, and the datasheet and SDS come with the first delivery so EHS can sign off.
All glues & chemicals →Karibom adhesive in syringe pack.
VIEW →Karibom instant adhesive.
VIEW →Themis adhesive · 30 ml · refrigerated storage.
VIEW →Aculon performance surface coating.
VIEW →Vaden high-temperature grease.
VIEW →PLCs, relays, solenoid valves, safety switches and device displays. Tell us the part number or the nameplate details and we quote the original first, with the nearest equivalent if it has gone obsolete.
CPU, I/O and comms cards for common platforms.
VIEW →Contactors, MCCB, MCB and control relays.
VIEW →By port size, function and coil voltage.
VIEW →Panel meters, timers and counters to cut-out size.
VIEW →Moulded-case circuit breakers for panel protection.
VIEW →All kinds of equipment accessories, testing instruments, labour supplies and auxiliary materials — bought against your machine and consumables list rather than one line item at a time, then consolidated into a single shipment and a single invoice.
Equipment accessories & wear spares
Nozzles, filters, belts, spares
Testing instruments, calibrated
Certificate in the box
Labour supplies, ESD grades · auxiliary materials
Gloves, coats, wipes, mats
Equipment agency services are one of our stated business lines. We hold agency for selected instrument and soldering brands, with local stock, commissioning and service behind them.
Area-imaging barcode scanners
View product →Soldering & rework stations
View product →Nano coating solves most solder-paste volume problems on fine-pitch boards: less scrappage, fewer cleaning cycles, higher first-pass yield and a longer foil life. The comparison is a print-quality one, and we will run it against your own board.
A pneumatic screen frame with springs on four sides holds the steel sheet in constant tension from the inside out. The body is titanium-magnesium alloy, so it survives long-term use — and every repeat order is a foil, not a framed stencil.
Tooling, fixtures and automation work, priced against the tolerance table.
Request a quotation →Equipment models, part numbers or the nameplate details. We identify, price the original and the equivalent, and consolidate the order.
Start a sourcing enquiry →A part number, a machine list or a tolerance. Whichever you have, it goes to a technical team.
Stencils, frames, pallets, magazines, feeders, splicing tools, tooling and test systems for surface-mount assembly. Stocked and supplied from Malaysia. All items are quoted to your specification — no list pricing.
{{ t.desc }}
GET A QUOTE →Send us the part number, brand or a photo. We source beyond what's listed here.
{{ pBlurb }}
| {{ row.k }} | {{ row.v }} |
Every fixture here is cut for one part. Send the model or the sample and we design the locating scheme, the clamp sequence and the wear surfaces around it — then machine, fit and try it out before it ships.
{{ t.desc }}
GET A QUOTE →Send us the part number, brand or a photo. We source beyond what's listed here.
Tell us the part and the cycle time you need. You get a concept sketch and a price before anything is cut.
Cutting tools and machine consumables held locally, so a broken end mill is a same-week problem and not a six-week one. Tell us the material and the finish you are chasing and we will match the geometry.
{{ t.desc }}
GET A QUOTE →Send us the part number, brand or a photo. We source beyond what's listed here.
Adhesives, coatings and greases for electronics assembly — stocked locally with the datasheet and SDS on hand, so procurement and EHS can sign off the same day.
{{ t.desc }}
GET A QUOTE →Send us the part number, brand or a photo. We source beyond what's listed here.
Control and safety components for machines already on your floor. Tell us the nameplate details — we will identify the part, quote the original, and tell you the nearest equivalent if the original is obsolete.
{{ t.desc }}
GET A QUOTE →Send us the part number, brand or a photo. We source beyond what's listed here.
Area-imaging scanners for traceability at every station — reads damaged and on-screen codes.
Self-regulating hand-soldering systems, cartridges and rework — plus tip supply and calibration.
One purchase order instead of eight. We consolidate equipment accessories, instruments and consumables from vetted suppliers, clear them, and deliver to your store — with the paperwork your audit expects.
Nozzles, filters, belts and spares for line equipment
GET A QUOTE →Bench and in-line test gear, sourced with calibration
GET A QUOTE →Gloves, caps, ESD wear and cleanroom consumables
GET A QUOTE →Send us the part number, brand or a photo. We source beyond what's listed here.
Part numbers, drawings or just photos of what you are using.
Original and equivalent, with lead time and MOQ against each.
One order, one shipment, one invoice — customs handled here.
With COO, COC and test certificates where they apply.
Monitored rivet guns, automatic rivet-pulling machines, screw machines and non-standard cells — every joint recorded with a tension curve. Specified, supplied and supported in Malaysia by Jujin. All machines are quoted to your part and cycle time.
{{ t.desc }}
GET A QUOTE →Send us the part number, brand or a photo. We source beyond what's listed here.
{{ sr.intro }}
{{ it.desc }}
Send the part, the rivet or screw size and your cycle target. We will come back with the model that fits and what it costs to run it here.
Automation fixtures, and SMT tooling and jigs, are the two lines supplied to a drawing rather than from a catalogue. The equipment they are produced on, at the source factory — four machines for cutting and shaping, six for measuring and testing.
Machining floor — source factory
Measuring room — source factory
| Size | 3×3 mm – 1.18×1.18 mm |
| Thickness | 1.5mm – 100mm |
| Depth | ±10 µm |
| Outline tolerance | NN ±30 µm |
| Slot tolerance | ±10 µm |
| Hole tolerance | ±10 µm |
| Flatness | ±10 µm |
Electronics manufacturers, semiconductor assembly plants, automotive suppliers and contract manufacturers — in Malaysia and across the region.
A copy has been sent to your email. Our engineer will reply with a quotation and lead time within one working day.
This policy explains how Jujin Plastic Technology (M) Sdn. Bhd. (Registration No. 202501027253 (1628665P)) (“Jujin”, “we”) collects, uses and protects personal data, in line with Malaysia’s Personal Data Protection Act 2010 (PDPA).
We only collect the personal data you choose to give us, such as when you send an enquiry or request a quotation:
Our web host keeps standard server logs (such as IP address, browser type and pages visited) for security and troubleshooting. This website does not use analytics or advertising cookies.
We do not sell or rent your personal data, and we do not send marketing messages unless you ask us to.
Only when needed for the purposes above, we may share your data with:
Drawings and technical files are shared only to quote or make your parts, and are treated as confidential.
If you contact us on WhatsApp, your messages are also handled by WhatsApp (Meta) under its own privacy policy.
We keep personal data only for as long as needed for the purposes above, or as required for tax, accounting and legal reasons. After that it is deleted or securely destroyed.
We take reasonable practical steps to protect your data from loss, misuse and unauthorised access. Access is limited to staff who need it for their work.
Under the PDPA you may ask to see the personal data we hold about you, ask us to correct it, or withdraw your consent and limit how we use it. Contact us using the details below and we will reply within 21 days.
If you do not give us the data we need, we may not be able to reply to your enquiry or prepare a quotation.
We may update this policy from time to time. The latest version is always on this page.
These terms apply to your use of www.jujin-tech.com, operated by Jujin Plastic Technology (M) Sdn. Bhd. (Registration No. 202501027253 (1628665P)) (“Jujin”, “we”). By using this website you agree to them.
Product descriptions, photos and specifications are for general reference. They may change without notice, and actual products may differ slightly in appearance. Please confirm the details that matter to you in your quotation.
Sending an enquiry through this website does not create an order. Prices, availability and lead times are confirmed only in a written quotation from Jujin, and orders are subject to our terms of sale.
By sending us drawings or files, you confirm you have the right to share them. We use them only to quote, make or supply your parts, and you keep ownership of them.
Third-party brand names, model numbers and logos on this website belong to their owners and are used only to identify products and customers. Showing a customer’s logo does not mean that company endorses Jujin.
The text, photos and design of this website belong to Jujin unless stated otherwise. Please do not copy or reuse them for commercial purposes without our written permission.
This website links to other sites, such as WhatsApp and our Chinese-language website. Their own terms and privacy policies apply when you use them.
We work to keep this website accurate and available, but we cannot guarantee it is always complete, current or free of errors. To the extent permitted by law, Jujin is not liable for any loss arising from use of this website or reliance on its content.
These terms are governed by the laws of Malaysia, and any dispute is subject to the courts of Malaysia. If the English and Bahasa Malaysia versions differ, the English version applies.
We may update these terms from time to time. The latest version is always on this page.
Jujin Plastic Technology (M) Sdn. Bhd. is a Malaysia-based enterprise with deep industry experience and a professional technical team. We supply hardware components, SMT supporting accessories — laser stencils, nano-coated stencils, test jigs, tooling carriers, magnetic pallets, component magazines, docking conveyors, burn-in test systems and equipment spare parts — alongside electronic and electrical products, industrial chemicals and equipment agency services.
Backed by robust technical capability, sustained R&D, integrity-oriented business principles and premium customer service, the company has earned recognition from clients across diverse industries and built a reputable standing in the market.
Continuously iterate to elevate professionalism.
Helping our customers increase their business core value — through innovation, excellent service, quality and delivery.
A technical team that reads drawings, not just purchase orders.
SMT and precision tooling. We do not spread ourselves thin.
A documented QA system with dimensional measurement on receipt.
Abundant sourcing resources for parts we do not make ourselves.
Sourced at origin and consolidated, so the price is not carrying extra layers.
Responsible handling of materials, chemicals and waste.
For quotations use the enquiry form — it reaches sales and engineering together. For anything else, the details below.
Use the quotation form so your enquiry reaches the engineer directly.
Request a quotation →Our engineer will reply with a quotation and lead time within one working day.
